Concrete Curing Compound

Scope of work

Application of curing compound onto fresh concrete surface

General purpose of curing compounds for fresh concrete

• To form a film covering the surface of concrete to prevent premature water loss due to evaporation
• Allow the concrete to cure with complete hydration of cement and achieve maximum properties.

Materials available for concrete curing

ANTISOL E

Emulsified paraffin based curing compound.
Ready to use
Very effective particularly on horizontal surfaces even subject to windy and sunny conditions
Shall be removed prior application of subsequent surface treatment
ANTISOL S

Aqueous concrete curing silicate solution
Ready to use
Particularly used for the treatment of vertical concrete surface
Does not impair adhesion of subsequent treatments to concrete surface (when applied within recommended dosage rates)
Compound* Application procedure

Please consult our product technical data sheets for full application recommendations.

Applicable by spray.
Typical Consumption rate: 0.2 to 0.25 litre of Antisol E or Antisol S per m2.
Protect fresh coat from rain